Please help me asap I am building the whole box out of wood and lost my measurements of the finished size of my 52 f1 box mostly I need the width exact finished size I am close to completion sides a re solid quartersawn white oak with jatoba inserts with qs oak rails and stiles a solid qs oak tailgate nlayed wenge and lots done to finish setup of floor i need the finished outside width so my fenders sit in the corect position help would be greatly appreciated

 

woody, please put some more pics of the purple f1 in your gallary, that sure is a nice looking truck, thanks in advance Garry

 

I was messing around with avatars when i found this one its not mine but it sure is hot eh

 

Here's the chart from the Dealer's Handbook. Stu

 

what info i need is the crossmember locations but thanx for this info its very helpful

 

HI Woody,

There's tons of info on the dimensions on a number of sites and here on FTE.

The first one I came up on is from "Earls World."

I'll post the link, and if you scroll about 2/3 of the way down you will see his dimensional drawings on the bed boards. There are dimensions for wood to cross member hole drilling dimensions there - those are the dimensions for your cross member centers.

Here's the link. If you need more let me know. I have quite a few references..also check out Mar-k who advertises here.

MAR-K Catalog

http://www.clubfte.com/users/earl/Re..._Material.html

Good luck
Julie

PS Well here, I'll post a picture from "Earls World" as well....excellent site...recommend it to all!