hey i just got some bfg m/t's for my 89 f150 with a 3 inch body lift and i got 32x11.5's there gonna rub the radius arm i know but wat can i do to prevent that.

 

Don't turn sharp. You should be fine unless you are cranking your wheel tight.

 

lift dont matter i they r rubbin the radius arms....get a wheel wtih less backspacing

 

It's pretty much unavoidable...I have skyjacker radius arms that are bent in for added clearance and i still rub w/ the 32/11.5s...those are on the stock rims. My 35/12.5s with 3.62" backspacking rub pretty good. You can adjust the steering stops so that they don't rub.