Sliding rear window help
#1
#2
Some are darker than others but I don't think clear is an option. and your original was raw aluminum and I know that's not available anymore, so a dark frame with a clear window is not something most would want.
They really don't look that bad, in fact most people would prefer the darker tint. I looked for an NOS bright one for a long time and finally gave into the dark side when I couldn't find one.
They really don't look that bad, in fact most people would prefer the darker tint. I looked for an NOS bright one for a long time and finally gave into the dark side when I couldn't find one.
#7
Trending Topics
#9
The following users liked this post:
#10
#11
they are mustang wheels 2010 - 2014 fr500 style 18x9 with 235/50/18s on the front 18x10 with 295/40/18on the rear personally if I did it again I think I would goa little taller front and rear but same width. I got the rims cheap and wanted to see if the would fit, I would really like the same size and offset but same rims as the elenor mustang on gone in 60 seconds had.
#12
That is the exact wheel setup I have been looking at is why i asked. I thought those were the Shelby wheels. I wasn't sure how bed clearance was on the rear though for 10" wheels but I'm running the 8.8 from the crown vic. Look up the American Racing VN507 wheels. I have them on my list as well as they would be the right offset and look like the vintage Eleanor wheels.
#13
yea they are what I want someday in the pics I have a 8.8 from an explorer with 3 inch spacers so about 64 inches wide and they fit with room, now I have irs from a 2018 mustang in the back and I had to trim the lips on the rear fenders but they fit after that, The irs was quite a bit wider. Look threw this thread i beilve he rean the 17x10.5s in the rear with a crown vic axle. clifford
Thread
Thread Starter
Forum
Replies
Last Post
gfburke
1973 - 1979 F-100 & Larger F-Series Trucks
8
03-17-2016 06:48 PM
twosfamily
WTB - Parts & other
2
01-02-2013 11:51 PM
Negrey
1973 - 1979 F-100 & Larger F-Series Trucks
13
09-28-2009 11:59 PM