Don't DIY injectors!? Of course i will! And then I'll compare them with...
#391
12-06-2022 | 03:58 PM
Thread Starter
|
Cargo Master
Joined: Mar 2019
Posts: 2,907
Likes: 783
From: Kinnula,Finland
The following users liked this post:
#392
12-06-2022 | 07:25 PM
Former Vendor
Joined: Sep 2020
Posts: 2,597
Likes: 694
From: Florence, MT
The following 2 users liked this post by Bitterroot Diesel:
#393
12-06-2022 | 10:39 PM
Moderator
Joined: Dec 2011
Posts: 11,342
Likes: 4,071
The following 2 users liked this post by Y2KW57:
#394
12-06-2022 | 10:41 PM
Former Vendor
Joined: Sep 2020
Posts: 2,597
Likes: 694
From: Florence, MT
The following users liked this post:
#395
12-07-2022 | 12:42 AM
Thread Starter
|
Cargo Master
Joined: Mar 2019
Posts: 2,907
Likes: 783
From: Kinnula,Finland
The following 2 users liked this post by FinnishStroker:
#396
12-07-2022 | 06:33 AM
Identifies as He/Him/Noob
Joined: Jan 2005
Posts: 11,450
Likes: 3,459
From: Henderson, NV
The following users liked this post:
#397
12-07-2022 | 07:15 AM
Thread Starter
|
Cargo Master
Joined: Mar 2019
Posts: 2,907
Likes: 783
From: Kinnula,Finland
It all about money.
No head studs ain't the only compromise in my so called "build".
Engine is still on the stand,If i had the money,i would do all that should be done now.
Cheaps studs are around 300$ and ARP at 700$.
I figured if it's been holding 3bar boost allready,might just not mess with it.
I was thinking at somepoint trying to source studs,based on specs,from some industry supplier from Finland..
No head studs ain't the only compromise in my so called "build".
Engine is still on the stand,If i had the money,i would do all that should be done now.
Cheaps studs are around 300$ and ARP at 700$.
I figured if it's been holding 3bar boost allready,might just not mess with it.
I was thinking at somepoint trying to source studs,based on specs,from some industry supplier from Finland..
#398
12-07-2022 | 07:22 AM
Identifies as He/Him/Noob
Joined: Jan 2005
Posts: 11,450
Likes: 3,459
From: Henderson, NV
It all about money.
No head studs ain't the only compromise in my so called "build".
Engine is still on the stand,If i had the money,i would do all that should be done now.
Cheaps studs are around 300$ and ARP at 700$.
I figured if it's been holding 3bar boost allready,might just not mess with it.
I was thinking at somepoint trying to source studs,based on specs,from some industry supplier from Finland..
No head studs ain't the only compromise in my so called "build".
Engine is still on the stand,If i had the money,i would do all that should be done now.
Cheaps studs are around 300$ and ARP at 700$.
I figured if it's been holding 3bar boost allready,might just not mess with it.
I was thinking at somepoint trying to source studs,based on specs,from some industry supplier from Finland..
#400
12-08-2022 | 07:41 AM
cncfab
Joined: Apr 2020
Posts: 4,686
Likes: 1,810
could you expound on that quote from me a bit?
What post number was that from, so future readers have a bit more context?
OH wait, never-mind you silly guy. I never said that. finnish did
careful with that “free” stuff, its expensive
What post number was that from, so future readers have a bit more context?
OH wait, never-mind you silly guy. I never said that. finnish did
careful with that “free” stuff, its expensive
#405
12-12-2022 | 03:51 PM
Thread Starter
|
Cargo Master
Joined: Mar 2019
Posts: 2,907
Likes: 783
From: Kinnula,Finland
Injectors leaving to California from Bitterroot!
I have a Shipito address in CA. We had trouble to source a reasonable shipping rates back to Finland.
The Mail Lady who fell in love with my box,almost had it!
Basicly i'm paying extra 100$ (shipping) just for having that box. I want the injectors to survive over the pond in 8 pieces.