When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Sorry and not the best pictures as it is sundown here in WY. Rims are Method NV 9X18 rims -15 offset, Toyo ATII Tires 285X75X18. Still looking at Fender Flares if anyone has any pics or recommendations. Think I am looking at flat black. Thanks!
Front tire looking down Front side view Rear side view
great choice on the wheel and tire, I am running almost the same setup. Except a 20” rim and a 295 tire. Mine stick out about the same and would love color matched flares. Just haven’t seen any I like.
Check out what comes on the new Roush edition. That’s what I’ve been eyeing, just don’t want to pay a fortune for them.
May ya also look into the heavy duty clear wrap to keep the rock chips down.
I have a Fusion bumper made in Idaho, the winch is a Smittybuilt x2o waterproof 12K with Black Oak Industries Lights. I can get you some pics on Monday since am away from home at the moment without the truck.
Kyle, Here are the pics you requested of the front bumper. Fusion does a really nice job and they cut out an area for my fog lights and some spots alongside that are Black Oak Industry spots. The 20" lighbar is also Black Oak. Winch is an X20 Smittybuilt 12K winch. Hope that answers your question.
I have seen a tutorial on YouTube for flare install. The kit they were selling was coming with strips of clear bra 1/2” wide to put on the fender where the new flares would make contact to prevent wear. If going aftermarket flares. I would do that for sure !
I just ordered a color matched set from Auto Elegance, but they do make black from EGR. They are the EGR pocket fender flares with 6" x 2" specs. I went with Auto Elegance because he has a painter that can paint the White Platinum tri-coat. Once I have them, I will throw pictures up.
EGR fender flares, color matched. Had a guy who does paint protection film do a strip on the body where the rubber seal rest. This is to avoid scratching the paint.
09-16-2018 | 11:15 AM
